Honda Accord Quiz
4-speed automatic transmission (AT)

Replacement of Transmission Control Solenoid Valves

In this manual: 4-speed automatic transmission (AT)
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

PROCEDURE


Solenoid Valve A and the clutch pressure control solenoid valves cannot be replaced individually; they are replaced as an assembly, whereas Solenoid Valves B and C can be replaced separately.

1. Выверните крепежные болты и снимите клапанную сборку.

1. Remove the valve body mounting bolts and remove the valve body assembly.

2. Тщательно протрите сопрягаемые поверхности и прочистите маслотоки.

2. Thoroughly clean the mating surfaces and clear the oil passages.
3. Replace the gasket/O-ring and install the new valve body assembly in its original position. Tighten the mounting bolts to the specified torque.
4. Check the electrical connector for contamination and corrosion of the contact terminals; clean and reconnect if necessary.
5. Check that the control solenoid valves operate correctly.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.