Pairing the Cellular Phone with the System

Your cellular phone, equipped with a Bluetooth interface, must be paired with the HFT system before you can make and receive phone calls.

NOTE:

You cannot perform the procedure of pairing your phone with the Hands Free (HFT) system while the vehicle is in motion.

During pairing of the phone with the HFT system, the phone must be in "Discovery" mode (searching for compatible devices).

Up to six cellular phones can be paired with the HFT system.

The following procedure applies to most cellular phones. If you cannot pair your phone with the HFT system using this procedure, refer to your phone's owner's manual or consult the retailer.

Before pairing a new phone with the HFT system, disconnect all previously paired phones.

1. With the ignition key in the ACCESSORY (I) or ON (II) position, press and release the TALK button. After the tone, say "Phone setup."

The HFT system will respond: "Phone setup options are status, pair, edit, delete, and list."

2. Press and release the TALK button. After the tone, say "Pair." The HFT system will respond: "The pairing process requires operation of your mobile phone." "For safety, only perform this function while the vehicle is stopped." State a four-digit code for pairing. Note this code. "It will be requested by the phone."

3. Press and release the TALK button. After the tone, say the four-digit code. For example, say "1, 2, 3, 4." The system will repeat the digits and ask you to confirm them.

4. Press and release the TALK button. After the tone, say "Yes." The HFT system will respond: "Searching for a Bluetooth phone."

Make sure the phone to be paired is in "Discovery" (search) mode.

NOTE: Steps 5 and 6 are the standard phone search procedure for a phone in "Discovery" mode. If you cannot pair your phone with the system using this procedure, refer to your phone's owner's manual.

5. In response to the prompt on your phone's display, set it to Search mode. The phone should find the HFT system. Once it does, select "Hands Free Telephone System" from the list on your phone's display.

6. In response to the phone's request, enter the password stored by the system in step 3. The system will report: "A new phone has been found." "What would you like to name this phone?"

7. Press and release the TALK button. After the tone, say the name you have chosen for the phone. For example, "Eric's phone." The system will confirm: "Eric's telephone is successfully paired." "Returning to the main menu."

8. To pair another phone, repeat steps 1 to 7.

To rename a phone, perform the following:

1. Press and release the TALK button. After the tone, say "Phone setup." The HFT system will respond: "Phone setup options are status, pair, edit, delete, and list."

2. Press and release the TALK button. After the tone, say "Edit."

The system will ask: "Which phone would you like to edit?" 3. Press and release the TALK button. After the tone, say the name of the phone you want to change. For example, "Eric's phone." The HFT system will ask: "What is the new name of Eric's phone?" 4. Press and release the TALK button. After the tone, say the new name of the phone.

For example, "Lisa's phone."

The system will confirm: "The name has been changed." "Returning to the main menu."

To delete the phone pairing, perform the following:

1. Press and release the TALK button. After the tone, say "Phone setup." The HFT system will respond: "Phone setup options are status, pair, edit, delete, and list."

2. Press and release the TALK button. After the tone, say "Delete." The system will ask: "Which phone would you like to delete?" 3. Press and release the TALK button. After the tone, say the name of the phone you want to delete. For example, "Eric's phone." The system will ask: "Would you like to delete Eric's phone?" 4. Press and release the TALK button. After the tone, say "Yes." The system will report:

"Preparing to delete Eric's phone." Confirm by saying "OK." If you change your mind, cancel by saying "Go back" or "Cancel."

5. Press and release the TALK button. If you said "OK," the system will confirm:

"The phone has been deleted" (Phone link has been deleted). "Returning to the main menu" (Returning to the main menu). If you answer "Go back" or "Cancel", the system will not delete the phone link.

To list all paired phones, perform the following:

1. Press and release the TALK button. After the tone, say "Phone setup." The HFT system will respond: "Phone setup options are status, pair, edit, delete, and list."

2. Press and release the TALK button. After the tone, say "List". The HFT system will read out all phones registered in the system. After all phones have been read, the system will announce: "The entire list has been read". "Returning to the main menu".

To check the status of the phone in use, perform the following:

1. Press and release the TALK button. After the tone, say "Phone setup." The HFT system will respond: "Phone setup options are status, pair, edit, delete, and list."

2. Press and release the TALK button. After the tone, say "Status".

The HFT system will respond, for example: "Eric's phone is linked". "Battery strength is three bars". "Signal strength is five bars, and the phone is roaming".

"Returning to the main menu".

Some phones are protected from transmitting their number to the HFT system.

To change the active phone, perform the following:

1. Press and release the TALK button. After the tone, say "Next phone". The HFT system will respond: "Searching for the next phone". After responding, the system will disconnect the active phone and search for another previously linked phone. If no other phone is found, the system will reactivate the previous phone.