Remote Transmitter Battery Replacement

If repeated presses of the remote transmitter buttons are required to lock or unlock the doors, replace the battery as soon as possible.

Battery type used:

CR1616

To replace the battery, perform the following:

1. Remove the screw on the bottom of the remote transmitter using a small Phillips screwdriver.

NOTE: Be careful when removing this screw, as its head may break.

2. Remove the key from the remote control. To do this, press the button on the outside.

3. To prevent scratches, place a piece of cloth on the corner of the remote control and remove the upper cover by carefully prying it with a small flat-blade screwdriver.

4. Remove the old battery from the remote control, paying attention to its polarity. Install a new battery into the remote control, turning it so that the side marked "+" faces down.

5. Install the remote control cover, then reassemble the remote control by installing the parts in reverse order.

This symbol on the battery means that it must not be disposed of with ordinary household waste.

Improper disposal of the battery may harm the environment and human health. Dispose of the battery in accordance with local regulations and standards.

(Vehicles intended for European countries)

EU Regulations

The keyless entry system complies with the "R & TTE" rules, which define the compliance of equipment with the operating standards for radio systems and telecommunication devices.

(For vehicles supplied to South Africa)