Hyundai Accent Quiz
DOHC Engines

Flywheel

In this manual: DOHC Engines
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

Маховик
Flywheel

1 – ring gear;
2 – flywheel;
3 – bolt, 130–140 N•m;
4 – drive plate;
5 – adjusting plate;
6 – bolt, 130–140 N•m;
7 – adjusting plate.

Removal

PROCEDURE

1. Remove the transmission and clutch.
2. Remove the bolts and the flywheel. If the vehicle has an automatic transmission, remove the drive plate. When removing the bolts, lock the flywheel to prevent it from rotating.

Inspection

PROCEDURE

1. Check the flywheel surface contacting the clutch disc. If there is significant wear, replace the flywheel.
2. Check the runout of the flywheel surface contacting the clutch disc.
Runout: 0.1 mm
3. Check the flywheel ring gear for damage and wear, and replace it if necessary.

Installation

PROCEDURE

Install the flywheel or drive plate onto the crankshaft. Using the Special Service Tool, lock the flywheel against rotation and tighten the flywheel bolts.
Torque: 130–140 N•m

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.