Hyundai Accent Quiz
DOHC Engines

Removal

In this manual: DOHC Engines
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Для разборки и повторной сборки поршня и шатуна необходимо использовать специальные

1. To disassemble and reassemble the piston and connecting rod, use Special Service Tools 09234–33001.
2. Install the universal supports into the clamp between the connecting rod and the piston.
3. Insert the puller through the hole in the clamp arch.

Insert the clamp with the piston, connecting rod and puller under the press ram.

4. Съемником выдавите поршневой палец из поршня.

4. Using the puller, press the piston pin out of the piston.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.