Hyundai Accent Quiz
Suspension

Removal

In this manual: Suspension
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Remove the front wheel.
2. Remove the cotter pin from the drive shaft, then remove the nut and the washer securing the drive shaft to the front wheel hub.
3. Loosen the ball joint nut on the lower control arm, but do not remove it completely.
4. Remove the two bolts securing the lower part of the strut to the steering knuckle.
5. Pull the steering knuckle outward and remove the drive shaft from the hub.

6. Съемником 09568–34000 выдавите цапфу шарового шарнира из поворотного кулака.

6. Using puller 09568–34000, press the ball joint stud out of the steering knuckle.
7. Temporarily install the lower strut mounting bolt.
8. Remove the stabilizer link nut.

9. Выверните болт крепления передней стороны нижнего рычага и задние болты крепления

9. Remove the bolt securing the front of the lower control arm and the rear bushing bolts.
10. Remove the lower control arm.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.