Hyundai Accent Quiz
Suspension

Disassembly

In this manual: Suspension
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

Ball Joint and Dust Boot Replacement

PROCEDURE

1. Лезвием отвертки снимите пылезащитный чехол с шарового шарнира нижнего рычага.

1. Using the tip of a screwdriver, remove the dust boot from the lower control arm ball joint.
2. Remove the snap ring.

3. Капроновым молотком отделите шаровой шарнир от нижнего рычага.

3. Using a plastic hammer, separate the ball joint from the lower control arm.

4. Специальным инструментом запрессуйте новый шаровой шарнир в нижний рычаг.

4. Using the special tool, press the new ball joint into the lower control arm.
5. Install the snap ring.

6. Специальным инструментом установите пылезащитный чехол.

6. Using the special tool, install the dust boot.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.