Smart Cruise Control Speed

Setting the Smart Cruise Control Speed

1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator will illuminate.

2. Accelerate to the desired speed.

The Smart Cruise Control speed can be set as follows:

• 30 km/h~180 km/h: when there is no vehicle ahead
• 0 km/h~180 km/h: when there is a vehicle ahead

3. Push the lever down (SET-) and release it at the desired speed. The set speed and vehicle-to-vehicle distance will be displayed on the LCD display.

4. Release the accelerator pedal. The desired speed will be maintained automatically.

If a vehicle is ahead of you, your vehicle may decelerate to maintain the distance to the vehicle ahead.

On steep hills, the vehicle may slow down or speed up slightly while driving uphill or downhill.

To Increase the Smart Cruise Control Set Speed

Perform any of the following procedures:

• Push the lever up (RES+) and hold it. The set speed of your vehicle will increase by 5 mph (10 km/h). Release the lever when you reach the desired speed.
• Push the lever up (RES+) and release it immediately. The set speed will increase by 1.0 mph (1 km/h) each time you move the lever up in this way.
• You can set the speed up to 110 mph (180 km/h).

To Decrease the Smart Cruise Control Set Speed

Perform any of the following procedures:

• Push the lever down (SET-) and hold it. The set speed of your vehicle will decrease by 5 mph (10 km/h). Release the lever when you reach the desired speed.
• Push the lever down (SET-) and release it immediately. The set speed will decrease by 1.0 mph (1 km/h) each time you move the lever down in this way.
• You can set the speed down to 20 mph (30 km/h).

To Temporarily Accelerate with Smart Cruise Control Engaged

If you want to temporarily accelerate while Smart Cruise Control is engaged, depress the accelerator pedal. The increased speed does not interfere with Smart Cruise Control operation or change the set speed.

To return to the set speed, release the accelerator pedal.

If you push the lever down (SET-) while accelerating, the cruise control set speed will be set again.

✽ NOTICE

Be careful when accelerating temporarily, because the vehicle speed is not controlled automatically during this time, even if there is a vehicle ahead of you.

Smart Cruise Control will be temporarily canceled when:

Canceled Manually

• The brake pedal is pressed.
• The CANCEL button is pressed. The button is located on the steering wheel.
• The brake pedal and the CANCEL button are pressed at the same time while the vehicle is stopped.

Advanced Smart Cruise Control is temporarily deactivated when the indicator on the LCD display turns off.

The CRUISE indicator stays on continuously.