Cancel

1. Depress the brake pedal.

2. Press the [AUTO HOLD] switch. The AUTO HOLD indicator will turn off.

WARNING

To prevent unexpected and sudden movement of the vehicle, ALWAYS press the brake pedal to cancel Auto Hold before:

- Driving down a slope.
- Operating the vehicle in R (Reverse).
- Parking the vehicle.

✽ NOTICE

• Auto Hold does not operate when:
  - The driver's seat belt is not fastened and the driver's door is open.
  - The engine hood is open.
  - The trunk is open.
  - The shift lever is in P (Park).
  - EPB is applied.
• For your safety, the Auto Hold function automatically switches to EPB when:
  - The driver's seat belt is not fastened and the driver's door is open.
  - The engine hood is opened with the shift lever in D (Drive).
  - The trunk is opened with the shift lever in R (Reverse).
  - The vehicle has been stationary for more than 10 minutes.
  - The vehicle is stopped on a steep slope.
  - The vehicle has moved several times.
  In these cases, the parking brake warning lamp illuminates, the AUTO HOLD indicator changes from green to white, a warning sounds and a message appears to inform you that the EPB has been applied automatically. Before driving again, press the brake pedal, check the area around the vehicle, and release the parking brake manually with the EPB switch.
• If the AUTO HOLD indicator changes to yellow, Auto Hold is not operating properly. Take your vehicle to an authorized HYUNDAI dealer and have the system inspected.
• If there is a malfunction in the driver's door, engine hood or trunk open detection system, Auto Hold may not operate properly. Take your vehicle to an authorized HYUNDAI dealer and have the system inspected.