Headlight

1. Open the hood.

2. Remove the bulb cover by turning it counterclockwise.

3. Disconnect the bulb socket connector.

4. Disconnect the bulb retaining clip by pressing one end and lifting it.

5. Remove the bulb from the headlamp assembly.

6. Install a new bulb and position the headlamp bulb retaining wire, aligning it with the groove in the bulb.

7. Connect the bulb socket connector.

8. Install the bulb cover by turning it clockwise.

Turn indicators

1. Remove the socket from the assembly by turning it counterclockwise until the tabs align with the slots in the assembly.

2. Remove the bulb from the socket by pressing it and turning it counterclockwise until the tabs align with the slots in the socket.

Pull the bulb out of the socket.

3. Insert a new bulb into the socket and turn it until it locks in place.

4. Install the socket in the assembly, aligning its tabs with the slots in the assembly. Push the socket into the assembly and turn it clockwise.

Position Light

1. Remove the socket from the assembly by pulling it straight out.

2. Remove the bulb from the socket by pulling it out.

3. Insert a new bulb into the socket.

4. Install the socket in the assembly by pushing it in.