Luggage System (Wagon)

The luggage system can help prevent luggage from sliding around the cargo area.

Built-in Partition Panel

• Place both partition panel supports (A) in the rail openings.
• To move the partition panel, press the lever (B).
• Make sure the supports click into place.
• To unlock the strap, turn the upper side of the support (C) left or straight until it clicks.
• Pull the strap (D) and put it over the luggage, then attach the hook to the center of the partition panel (F) to secure the luggage.
• You can secure bulky luggage by hooking both hooks together.
• To make sure the strap is securely fastened, place the upper side of the support (C) in the locked position (1).

CAUTION

• When installing or removing the partition panel, you must move both supports together at the same time.
• Max. load: 30 kg with one strap, 40 kg with two straps.

Using the Bracket

• Place the bracket (A) on the rail at the position where the bracket is intended to be located.
• To move the bracket, press the button (1) and slide the bracket along the rail.
• Make sure the bracket is pressed into place.
• To secure luggage, pull the hook (2) in the middle cargo area.
• You can now install, for example, a luggage strap onto the hook.
• You cannot use the bracket when it is in the rail groove (3).

CAUTION

Tensile force: max. 30 kgf per 1 shackle.