Brake System
Specification
In this manual: Brake System
~5min read
Contents:
Service Data
Service Data
Specification
| Item | Specification | |
| Front Brake (17 in. Disc) | Type | Ventilated Disc |
| Disc O.D. [mm, (in.)] | Ø325 (12.79) | |
| Disc thickness [mm, (in.)] | 30 (1.18) | |
| Cylinder type | Single Piston | |
| Cylinder I.D. [mm, (in.)] | Ø60.6 (2.38) | |
| Rear Brake (17 in. Disc / EPB) | Type | Solid disc |
| Disc O.D. [mm, (in.)] | Ø325 (12.79) | |
| Disc thickness [mm, (in.)] | 12 (0.47) | |
| Cylinder type | Single Piston | |
| Cylinder I.D. [mm, (in.)] | Ø45 (1.77) | |
Specification (ESC)
| Item | Item | Standard Value | Remark |
| Integrated Electronic Brake (IEB) |
Type | BLAC (Brushless AC Motor) |
|
| Battery Voltage (V) | 13 | ||
| Storke [ mm (in.) ] | Master cylinder : 32 - 34 (1.25 - 1.33) | ||
| Power cylinder : 33 - 35 (1.29 - 1.37) | |||
| Maximum Torque (N·m) | 3.2 (at 20 °C, 68°F, 2000 RPM) 2.8 (at 120 °C, 248 °F 2000 RPM) |
||
| Maximum Output (W) | 670 (at 20 °C, 68°F) 586 (at 120 °C, 248 °F) |
||
| Active Wheel Speed Sensor | Power Supply (V) | 4.25 - 20 | |
| Operating Condition (°C [°F]) | -40 - 120 (-40 - 248), [Maximum : 150 (302)] | ||
| Output Current Low (mA) | 5.96 - 8.05 | Typ .7 | |
| Output Current High (mA) | 11.9 - 16.1 | Typ .14 | |
| Output Range (Hz) | 0.03 - 3000 | ||
| Tone Wheel | Front : 52, Rear : 46 | ||
| Air Gap [mm, (in.)] | 0.4 - 1.5 (0.01 - 0.05) | ||
| Electric Parking Brake Switch | Storage Temperature (°C [°F]) | -40 - 85 (-40 - 185) | |
| Operating Condition (°C [°F]) | -30 - 75 | ||
| Rated Voltage (V) | 12.4 - 12.8 | ||
| Operating Voltage (V) | 9 - 16 | ||
| Stop Lamp Switch | Rated Voltage (V) | 12.4 - 12.8 | |
| Operation Voltage (V) | 6 - 18 | ||
| Operating and Storage Temperature [°C (°F)] | -40 - 90 (-40 - 194) |
Service Standard
| Brake pedal full stroke [mm, (in.)] | 136 (5.35) | |
| Stop lamp switch clearance [mm, (in.)] | 1 - 2 (0.039 - 0.078) | |
| Front brake disc pad | Thickness [mm, (in.)] | 11 (0.43) |
| Service limit [mm, (in.)] | 3 (0.11) | |
| Front brake disc | Thickness [mm, (in.)] | 30 (1.18) |
| Service limit [mm, (in.)] | 28 (1.10) | |
| Rear brake disc pad | Thickness [mm, (in.)] | 10 (0.39) |
| Service limit [mm, (in.)] | 2 (0.07) | |
| Rear brake disc | Thickness [mm, (in.)] | 12 (0.47) |
| Service limit [mm, (in.)] | 10 (0.39) | |
Tightening Torque
Tightening Torque
Brake bleeding| Item | N·m | kgf·m | lb·ft | lb·in |
| Front air bleeder screw | 6.9 - 12.7 | 0.7 - 1.3 | 5.1 - 9.4 | 60.8 - 112.8 |
| Rear air bleeder screw | 13.7 - 19.6 | 1.4 - 2.0 | 10.1 - 14.5 | - |
Brake line
| Item | N·m | kgf·m | lb·ft | lb·in |
| Front and rear caliper and brake hose bolt | 24.5 - 29.4 | 2.5 - 3.0 | 18.1 - 21.7 | - |
| Engine room brake line and IEB flare nut | 12.7 - 16.7 | 1.3 - 1.7 | 9.4 - 12.3 | - |
| Engine room brake line bracket and body bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | - |
| Front strut and front brake line bracket bolt | 12.7 - 16.7 | 1.3 - 1.7 | 9.4 - 12.3 | - |
| Front brake hose flare nut | 13.7 - 16.7 | 1.4 - 1.7 | 10.1 - 12.3 | - |
| Rear brake hose flare nut | 13.7 - 16.7 | 1.4 - 1.7 | 10.1 - 12.3 | - |
Brake pedal
| Item | N·m | kgf·m | lb·ft | lb·in |
| Brake member and body nut | 16.7 - 25.5 | 1.7 - 2.6 | 12.3 - 18.8 | - |
| Brake pedal support bracket and cowl cross bar assembly nut | 6.9 - 10.8 | 0.7 - 1.1 | 5.1 - 8.0 | 60.8 - 95.5 |
| Brake pedal arm and member assembly bolt and nut | 24.5 - 34.3 | 2.5 - 3.5 | 18.1 - 25.3 | - |
Front brake (Caliper, Disc, Pad)
| Item | N·m | kgf·m | lb·ft | lb·in |
| Front caliper guide rod bolt | 21.6 - 31.4 | 2.2 - 3.2 | 15.9 - 23.1 | - |
| Front caliper bolt | 98.1 - 117.7 | 10.0 - 12.0 | 72.3 - 86.8 | - |
| Front caliper and brake hose bolt | 24.5 - 29.4 | 2.5 - 3.0 | 18.1 - 21.7 | - |
| Front disc screw | 4.9 - 5.9 | 0.5 - 0.6 | 3.6 - 4.3 | 43.4 - 52.1 |
Rear brake (Caliper, Disc, Pad)
| Item | N·m | kgf·m | lb·ft | lb·in |
| Rear caliper guide rod bolt | 21.6 - 31.4 | 2.2 - 3.2 | 15.9 - 23.1 | - |
| Rear caliper bolt | 78.5 - 98.1 | 8.0 - 10.0 | 57.9 - 72.3 | - |
| Rear caliper and brake hose bolt | 24.5 - 29.4 | 2.5 - 3.0 | 18.1 - 21.7 | - |
| Rear disc screw | 4.9 - 5.9 | 0.5 - 0.6 | 3.6 - 4.3 | 43.4 - 52.1 |
Integrated Electronic Brake (IEB)
| Item | N·m | kgf·m | lb·ft | lb·in |
| Brake line and IEB flare nut | 12.7 - 16.7 | 1.3 - 1.7 | 9.4 - 12.3 | - |
| IEB assembly nut | 12.7 - 17.7 | 1.3 - 1.8 | 9.4 - 13.0 | - |
Reservoir tank
| Item | N·m | kgf·m | lb·ft | lb·in |
| Remote reservoir tank assembly nut | 6.9 - 10.8 | 0.7 - 1.1 | 5.1 - 8.0 | 60.8 - 95.5 |
| Reservoir tank screw | 1.0 - 1.5 | 0.10 - 0.15 | 0.7 - 1.1 | 8.7 - 13.0 |
Front wheel speed sensor
| Item | N·m | kgf·m | lb·ft | lb·in |
| Front wheel speed sensor bolt [4WD] | 8.8 - 13.7 | 0.9 - 1.4 | 6.5 - 10.1 | - |
| Front wheel speed sensor bracket bolt | 19.6 - 29.4 | 2.0 - 3.0 | 14.5 - 21.7 | - |
Rear wheel speed sensor
| Item | N·m | kgf·m | lb·ft | lb·in |
| Rear wheel speed sensor | 8.8 - 13.7 | 0.9 - 1.4 | 6.5 - 10.1 | - |
| Rear wheel speed sensor bracket and rear upper arm - rear bolt | 19.6 - 29.4 | 2.0 - 3.0 | 14.5 - 21.7 | - |
| Rear wheel speed sensor bracket and body | 19.6 - 29.4 | 2.0 - 3.0 | 14.5 - 21.7 | - |
Lubricant
Lubricant
| Item | Recommended | Capacity |
| Brake fluid (cc) | DOT 4 | As required (339 - 379 cc) *Refer to 'MAX - MIN" line on the reservoir tank |
| Brake pedal bushing and brake pedal bolt | Chassis grease (GREASE PDLV-1) |
As required |
| In order to maintain the best braking performance and ABS / ESC performance of the vehicle, please use genuine parts that meet the specifications. (Standard : SAE J1704 DOT-4 LV, ISO4925 CLASS-6, FMVSS 116 DOT-4) |
Was this page helpful?