Driveshaft and Axle

Specification

~2min read

Contents:

Tightening Torque

Tightening Torque

Front Axle Assembly

Item N·m kgf·m lb·ft lb·in
Front driveshaft lock nut 294.2 - 313.8 30.0 - 32.0 217.0 - 231.5 -
Front hub bearing bolt 127.5 - 147.1 13.0 - 15.0 94.0 - 108.5 -
Dust cover bolt 6.9 - 10.8 0.7 - 1.1 5.1 - 8.0 60.8 - 95.5
Front wheel speed sensor bolt [4WD] 8.8 - 13.7 0.9 - 1.4 6.5 - 10.1 -
Tie rod end ball joint and axle nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8 -
Front lower arm and knuckle bolt and nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8 -
Front knuckle and strut assembly bolt and nut 156.9 - 176.5 16.0 - 18.0 115.7 - 130.2 -
Strut assembly and front stabilizer bar link nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8 -

Rear Driveshaft and Axle Assembly

Item N·m kgf·m lb·ft lb·in
Integrated drive axle bolt 127.5 - 147.1 13.0 - 15.0 94.0 - 108.5 -
Inner shaft bearing bracket bolt 63.7 - 70.6 6.5 - 7.2 47.0 - 52.1 -
Rear assist arm and carrier bolt and nut 117.7 - 137.3 12.0 - 14.0 86.8 - 101.3 -
Trailing arm and carrier bolt and nut 117.7 - 137.3 12.0 - 14.0 86.8 - 101.3 -
Rear upper arm - front and carrier bolt and nut 156.9 - 176.5 16.0 - 18.0 115.7 - 130.2 -
Rear upper arm - rear and carrier bolt and nut 156.9 - 176.5 16.0 - 18.0 115.7 - 130.2 -
Rear lower arm and carrier bolt and nut 176.5 - 196.1 18.0 - 20.0 130.2 - 144.7 -
Rear stabilizer bar link and carrier nut 98.1 - 117.7 10.0 - 12.0 72.3 - 86.8 -
Rear wheel speed sensor bolt 8.8 - 13.7 0.9 - 1.4 6.5 - 10.1 -

Lubricant

Grease

Driveshaft joint

Item Joint Grease Quantity (g)
LH RH
Front driveshaft CVBJ - 2 (Wheel side) RBA 80 - 90 80 - 90
CVTJ - 2 (Reduction side) CW-13TJ 200 - 210 260 - 270
Rear driveshaft (IDA) HCG - 25 (Both sides) RCA 60 - 70 60 - 70