Kia Forte BD Quiz
Body Electrical System

Integrated Memory Seat (IMS) Switch

In this manual: Body Electrical System
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
5steps
~30min
2/5difficulty
Done 0 of 5

Components and Component Location

Component Location

1. Integrated Memory System Switch Assembly

Circuit Diagrams

Connector and Terminal Function

Repair Procedures

Removal

  1. Disconnect the negative battery cable.

  2. Remove the driver's door trim.

    (Refer to Body - "Front Door Trim Panel")

  3. Remove the IMS switch (A).

Installation

  1. Install in the reverse order of removal.

Inspection

  1. Remove the front door trim panel.

    (Refer to Body - "Front Door Trim Panel")

  2. While pressing each switch, check the continuity between the integrated memory seat switch connector terminal and ground. If the continuity does not meet the specification, replace the switch.

    Switch Connector Terminal Resistance (Ω)
    SET 1-3 200
    Memory 1 1-4
    Memory 2 1-5

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.