Kia Forte BD Quiz
Body Electrical System

Parking Distance Warning (PDW) Sensor

In this manual: Body Electrical System
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
4steps
~24min
2/5difficulty
Done 0 of 4

Circuit Diagrams

Wiring Diagram

Repair Procedures

Removal

Front Parking Distance Warning Sensor (PDW-F)

  1. Remove the under cover.

    Nu 2.0 MPI (Refer to Engine Mechanical System - "Engine Room Under Cover")

    Gamma 1.6 MPI (Refer to Engine Mechanical System - "Engine Room Under Cover")

  2. Disconnect the connector (A), then remove the PDW-F sensor (B) by opening the sensor holder (B).

Parking Distance Warning Sensor for Reverse Movement (PDW-R)

  1. Remove the rear bumper beam assembly.

    (Refer to Body - "Rear Bumper Beam Assembly")

  2. Disconnect the connector (A), then remove the PDW-R sensor (B) by opening the sensor holder (B).

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.