Body Electrical System
Power door mirror switch
In this manual: Body Electrical System
4steps
~24min
2/5difficulty
Done 0 of 4
Circuit Diagrams
Connector and Terminal Function

| Pin | Function |
| 1 | Ground |
| 2 | - |
| 3 | Mirror Folding |
| 4 | - |
| 5 | Mirror Folding Switch |
| 6 | Left Mirror General |
| 7 | Left Mirror Horizontal |
| 8 | Mirror Vertical |
| 9 | Right Mirror Horizontal |
| 10 | Right Mirror General |
| 11 | - |
| 12 | ACC |
Wiring Diagram

Repair Procedures
Inspection
Remove the front door trim panel.
(Refer to Body - "Front Door Trim Panel")
Check the continuity between terminals at each switch position in accordance with the table.
[Power Mirror Switch]

[Folding Switch]

Removal
Remove the front door trim panel.
(Refer to Body - "Front Door Trim Panel")
Remove the power mirror switch (A) by pulling on both ends of the switch holder.

Installation
Install in the reverse order of removal.
Test yourself
A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?