Kia Forte BD Quiz
Engine Electrical System

Smart Cruise Control (SCC) ECU

In this manual: Engine Electrical System
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
5steps
~30min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Circuit Diagrams

Terminal Function

NO. Terminal Function
1 Ground
2 -
3 -
4 -
5 C - MAY BE HIGH
6 L - MAY BE HIGH
7 -
8 -
9 -
10 IGN1
11 -
12 -
13 -
14 -
15 C - MAY BE LOW
16 -
17 -
18 -
19 -
20 L - MAY BE LOW
21 -
22 -
23 -
24 -
25 -
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37 -
38 -
39 -
40 -

Repair Procedures

Removal

SCC and FCA Unit (Australia only)

  1. Remove the driver airbag module assembly.

    (Refer to Body (Interior and Exterior) - "Main Protector Assembly")

  2. Disconnect the SCC and FCA unit connector.

  3. Remove the SCC and FCA unit (A).

    Tightening torque: 9.8–10.8 N·m

Installation

SCC and FCA Unit (Australia only)

  1. Install in the reverse order of removal.

  2. Align the variant coding procedure.

    (Refer to Adjustment - "Variant Coding")

Adjustment

Because the Advanced Smart Cruise Control ECU is integrated with the AEB unit, perform the "AEB Variant Coding Procedure" when replacing the Advanced Smart Cruise Control ECU.

(Refer to Smart Cruise Control Unit - "Adjustment".)

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.