Parking Collision-Avoidance Assist (PCA) : If there is a risk of collision with a rear object when moving revers, PCA provides a warning. After the warning, if the risk of collision increases, PCA automatically assists with emergency braking.
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) : If there is a risk of collision with an oncoming vehicle on the left or right side when moving revers, RCCA provides a warning. After the warning, if the risk of collision increases, RCCA automatically assists with emergency braking.
Rear View Monitor (RVM) : For safe parking, RVM displays the situation rear of the vehicle. Changing the gear to R or pressing the parking/view button, activates RVM.
Parking Distance Warning (PDW) : PDW warns against collisions with objects around the vehicle at low speeds. Changing the gear to R or pressing the Parking Safety button in gear D activates PDW.
Warning level
System check
Level 1
Level 2
Level 3
Front
No warning
60 - 100 cm (23.62 - 39.37 in.)
31 - 60 cm (12.20 - 23.62 in.)
0 - 30 cm (0 - 11.81 in.)
Rear
60 - 120 cm (23.62 - 47.24 in.)
31 - 60 cm (12.20 - 23.62 in.)
0 - 30 cm (0 - 11.81 in.)
Indicator display
Components and Components Location
Component
[Front]
[Rear]
1. Front Ultrasonic Sensor 2. Rear Ultrasonic Sensor
3. Wide Angle - Rear Camera
Rear View Monitor (RVM) Description and Operation
Description and Operation
Function Name
Item
Function Name
Function
Parking Safety
Rear View Monitor (RVM)
Display of vehicle rear image on the AVNT via wide angle rear view camera
Rear View While Driving (RVWD) RVWD function is used to switch on rear view while driving forward.
Operation Condition
Start ON.
Press button (A) when in drive (D) or neutral (N) shift position.
Release Condition
Press button (A) again.
Rear View Monitor (RVM) Specification
Specification
Item
Specification
Rated voltage (V)
6.5
Operating voltage (V)
6 - 7
Operating temperature [°C (°F)]
-30 to 75 (-22 to 167)
Quantity
RVM
1
Rear View Monitor (RVM) On Vehicle Inspection
On Vehicle Inspection
Visual Inspection If there is a problem with RVM, PCA check the items below.
Check the cleanliness of the wide angle camera mounting location.
If the wide angle camera lens is contaminated with snow, dust, or stickers, the performance may deteriorate.
If the wide angle camera lens glass is damaged, the performance may deteriorate.
Check the condition around the wide angle camera
If a door or trunk (tailgate) equipped with a wide angle camera is opened, an abnormal screen may be displayed.
Check the shape and condition of the wide angle camera mounting location
If the vehicle is tilted due to cargo loading, etc. the accuracy of parking guidelines and RVM top view may be reduced.
If moisture enters the wide angle camera lens, performance may deteriorate.
Check the wide angle camera and driver assistance parking controller in case of a trouble code.
Check for damage to the wide angle camera, IBU.
Check connection status to the wide angle camera, IBU connector and wiring.
Check the button operation
For RVM specification, press the parking/view button (A) briefly (less than 1 second) to confirm RVM On/Off.
Check for Poor Picture Image Quality of Wide Angle Camera
Symptom
Cause
Dirty lens
Damaged lens
Damaged lens
Airtightness failure
Blurry and display quality trouble
Exterior stain
Lens coating peeled
Lens crack
Inflow of water in lens
Any object or line on monitor
Crack and inflow of water
Countermeasure
Clean the exterior of lens with water or clean cloth (fabric)
Clean lens with Kia approved cleaners, if unable to clean, replace camera.
Replace wide angle camera
Repair or replace the wiring
Check whether the vehicle is equipped withe a genuine product or not. (if the vehicle is not equipped with a genuine wide angle camera, it will result in low quality image or malfunction.)
Warranty repair in not available for the replacement of the wide angle camera in case of malfunction due to negligence in use (cleaning with detergent, imfact from foreign substances) or non genuine installation.
Be sure to clean it with water or a clean cloth when cleaning the exterior of the wide angle camera lens.
Check whether the same defect occurs After checking the surface condition of the wide angle camera lens and removing foreign substances.
The coating of the wide angle camera lens may be peeled off when washing the car with a strong acid cleaner.
The wide angle camera lens can be damaged by objects such as sones frying from outside while driving.
Diagnosis with KDS
The advanced driver assistance system (parking) can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide")
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
Refer to the KDS screen for operating conditions and details.
Rear View Monitor (RVM) Connector And Terminal Function
Connector And Terminal Function
Pin No
Connector
1
Camera ground ( - )
2
C-CAN (High)
3
Camera video output
4
Camera video ground
5
C-CAN (Low)
6
Camera power ( + )
Rear View Monitor (RVM) Removal and Installation
Removal
In the case of poor image quality or poor focus, first check the surface condition of the wide angle camera lens and contamination by foreign substances.
Remove the tailgate garnish. (Refer to Body - Tailgate Garnish)
Remove the wide angle rear camera (A) after removing the screws.
Installation
Install in reverse order of removal.
If there is a problem after replacing the wide angle camera, replace the IBU and check the normal operation.
If the error presists after replacing the IBU, do not replace it.
Parking Distance Warning (PDW) Specification
Specification
Item
Specification
Rated voltage (V)
12
Operation voltage (V)
9 - 16
Front Detecting range (cm (in.))
30 - 100 (11.81 - 39.37)
Rear Detecting range (cm (in.))
30 - 120 (11.81 - 47.24)
Operation current (mA)
Max. 350
Operation frequency (KHz)
43 - 53
Operating speed (km/h)
10 or below
Quantity
PDW-R
4
PDW-F/R
8
Parking Distance Warning (PDW) Description and Operation
Description and Operation
Function Name
Item
Function Name
Function
Parking Safety
Parking Distance Warning - Reverse (PDW - R)
Detect pedestrians and objects around the vehicle when driving backward and warn by the steps.
Detects pedestrians and objects around the vehicle when driving backward and assists in collision avoidance with warning or braking.
System Operation Specification
Initial mode
PDW recognizes LIN ID and sets the sensor ID up during initialization.
When IBU initialization is completed, for 100 ms, the PDW will drive each sensor to perform fault diagnosis.
Fault diagnosis is completed, the sensor does not transmit fault information, and a PDW warning is issued.
If at least one front/rear sensor failure, display a fault warning.
The fault statement is displayed on the instrument cluster, and the fault symbol is displayed on both the instrument cluster and the audio/AVN monitor.
Normal mode
The start of the normal routine after initialization begins after 100ms delay after completion of the alarm output.
The obstacle alarm has 3 levels in 1, 2 and 3 step levels; alarms 1 and 2 have intermittent audible sounds, while alarm 3 has continuous audible sound. For the front ultrasonic sensor level 1 alarm does not exist.
In the case of a cluster display, information from each sensor is transmitted from the IBU to the cluster.
The operating vehicle speed of the PDW is less than 10 km/h.
Parking Distance Warning (PDW) On Vehicle Inspection
On Vehicle Inspection
Visual Inspection If there is a problem with PDW, PCA check the items below.
Checking bumper cleanliness
If snow or water droplets freeze on the ultrasonic sensor surface, the performance may deteriorate.
If there are foreign substances such as mud on the surface of the ultrasonic sensor, the performance may deteriorate.
Check the condition around the bumper
If an object generating ultrasonic waves is nearby, the performance may deteriorate.
If decorations are attached around the ultrasonic sensor, the performance may deteriorate.
Checking bumper geometry or mounting status
If the ultrasonic sensor and the peripheral part are arbitrarily separated, the performance may deteriorate.
If an impact is applied to the surface of the ultrasonic sensor or if it is damaged by scratches, the performance may deteriorate.
If the installation state of the ultrasonic sensor is different from that at the time of shipment of the vehicle, the performance may deteriorate.
If decorations are attached around the ultrasonic sensor, the performance may deteriorate.
Check the ultrasonic sensor installation status when a trouble code occurs
Check the button operation
For PDW specification, press the parking safety button (A) briefly (less than 1 second) to confirm PDW On/Off.
For PCA specification, press the parking safety button (A) briefly (more than 1 second) to confirm PCA On/Off.
The advanced driver assistance system (parking) can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide")
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
Refer to the KDS screen for operating conditions and details.
Diagnosis with KDS
Parking Distance Warning (PDW) Connector And Terminal Function
Connector And Terminal Function
Pin No
Connector
1
-
2
-
3
-
4
Ground ( - )
5
LIN
6
Sensor power ( + )
Parking Distance Warning (PDW) Removal and Installation
Removal
For failures such as PDW false warnings or non-warning, firstly check the surface condition of the ultrasonic sensor and contamination by foreign substances.
Ultrasonic Sensor [Front]
Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly")
Disconnect the ultrasonic sensor connector (A).
Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly")
Disconnect the ultrasonic sensor connector (A).
Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
Ultrasonic Sensor [Rear]
Installation
Install in reverse order of removal.
Driver Parking Assistance Switch Connector And Terminal Function
Connector And Terminal Function
Pin No
Connector
1
Passenger's side heater switch signal
2
Passenger's side heater switch High IND
3
Passenger's side heater switch Mid IND
4
Passenger's side heater switch Low IND
5
Passenger's side ventilation switch signal
6
Passenger's side ventilation switch High IND
7
Passenger's side ventilation switch Mid IND
8
Passenger's side ventilation switch Low IND
9
-
10
Ground ( - )
11
Parking safety button
12
Parking / view button
13
AWD Lock switch input
14
-
15
Parking safety button IND
16
-
17
-
18
illumination ( + )
19
-
20
Illumination ( - )
Driver Parking Assistance Switch Removal and Installation
Removal
Remove the console upper cover. (Refer to Body - "Console Upper Cover")
Remove the console upper cover garnish after removing the screws.
Disconnect the driver parking assistance switch connector (A).
Remove the driver parking assistance switch (A) after removing the screws.