General Information

Important Safety Notice

~2min read

Contents:

General Information

Important Safety Notice

The service procedures and descriptions in this shop manual provide general directions for a service and repair. Procedure, techniques, tools, and parts for service including the skill of the technician vary. It is impossible to provide advice or caution as to each case in this manual. Accordingly, anyone who intends to use a replacement part, service procedure, or tool, which is not recommended by the vehicle manufacturer, must first assure thoroughly that neither their personal safety nor the safe operation of the vehicle will be first jeopardized by the replacement part, service procedure, or tool they select.

Important Safety Information Types

Danger
Reminds you be very careful for those works may have high possibility of death or serious injury.
Warning
Reminds you be very careful for those works may have possibility of death or serious injury.
Caution
Reminds you be very careful for those works may have possibility of personal injury.
Note
Gives you information that will prevent you from making errors that could damage the vehicle.
Information
Gives you some information that will help you to complete the repair or procedure.

Precautions for Service

  • Disconnect the battery negative ( - ) terminal whenever work on the fuel system or the electrical system to avoid the risk of fire.
  • Do not smoke during work and do not work near fire hazards like heaters.
  • Keep a fire extinguisher nearby.
  • Use a lift designed for the vehicle when working underneath the vehicle. Refer to the lift points and precautions when using a vehicle lift. (Refer to General Information - "Lift and Support Points")
  • It is better not to work if you are feeling sick. The risk of injury increases and the quality of the vehicle after delivery to customer cannot be guaranteed.
  • Do not run the engine unless the work area is well ventilated.
  • When handling harmful substances and machine tools, wear appropriate goggles, gloves and cloth.
  • If hair, clothing, or jewelry is caught into the machine, it can cause serious injury. Do not wear ties, scarves, or necklaces and tie long hair behind your head when working.
  • Do not reuse worn or deformed fasteners, nuts and bolts. Some parts are prohibited for reuse. Follow instructions for those reuse prohibit parts in the manual.
  • Friction parts such as brake pads and clutch discs may contain asbestos fibers. Be careful not to inhale asbestos fibers when grinding, sanding.
  • Always keep the draining fuel, oil, brake fluid on a suitable container during work.
  • The air conditioning (A/C) system is filled with harmful refrigerants. The A/C system should only be serviced by certified technicians using approved refrigerant recovery/recycling equipment in the correct manner.