Intelligent Variable Transmission (IVT) System
Specification
Contents:
Service Data
Service Data
| Item |
Specification |
| Transmission model |
Smartstream IVT (C0GF1) |
| Engine model |
Nu 2.0 Atkinson |
| Clutch type |
Torque converter |
| Oil pump type |
Chain drive vane pump |
| Planetary gear |
Double pinion planetary gear |
| Components |
Oil Pump |
1 unit |
| Oil filter |
Main filter : 1 unit |
| Pressure filter : 1 unit |
| Clutch |
1 unit |
| Brake |
1 unit |
| Planetary gear |
1 unit |
| Drive pulley |
1 unit |
| Driven Pulley |
1 unit |
| Chain belt |
1 unit |
| Solenoid valve |
Direct Control VFS : 1 unit |
| Indirect Control VFS : 4 units |
*IVT : Intelligent Variable Transmission *IVTF : Intelligent Variable Transmission Fluid *VFS: Variable Force Solenoid Position Switch
| Item |
Specification |
| Power supply (V) |
4.5 - 5.5 |
| Output type |
Shifting range (P/R/N/D) |
Non-contact (2 channel PWM signal) |
| Start, Reverse |
Contact |
E-Module
Drive Pulley Speed Sensor
| Item |
Specification |
| Type |
Hall sensor |
| Output voltage (V) |
High : 1.18 - 1.68 (Nor : 1.4) |
| Low : 0.59 - 0.84 (Nor : 0.7) |
Turbine Speed Sensor
| Item |
Specification |
| Type |
Hall sensor |
| Output voltage (V) |
High : 1.18 - 1.68 (Nor : 1.4) |
| Low : 0.59 - 0.84 (Nor : 0.7) |
Oil Temperature Sensor
| Item |
Specification |
| Type |
NTC thermistor |
| Temperature [°C (°F)] / Resistance (kΩ) |
-40 (-40) / 139.5 |
| -20 (-4) / 47.4 |
| 0 (32) / 18.6 |
| 20 (68) / 8.1 |
| 40 (104) / 3.8 |
| 60 (140) / 1.98 |
| 80 (176) / 1.08 |
| 100 (212) / 0.63 |
| 120 (248) / 0.38 |
| 140 (284) / 0.25 |
| 160 (320) / 0.16 |
Driven Pulley Pressure Sensor
| Item |
Specification |
| Pressure (Mpa) |
0 - 6 |
| Operating temperature [°C (°F)] |
-40 to 140 (-40 to 284) |
| Output voltage (V) |
5 |
Driven Pulley Speed Sensor
| Item |
Specification |
| Type |
Hall sensor |
| Supply voltage (V) |
9 |
| Output signal (mA) |
High : 11.8 - 16.8 |
| Low : 5.9 - 8.4 |
Tightening Torque
Tightening Torque
Intelligent Variable Transmission (IVT)
| Item |
N·m |
kgf·m |
lb·ft |
| Shift cable bolt |
14.7 - 21.6 |
1.5 - 2.2 |
10.8 - 15.9 |
| Shift cable nut |
9.8 - 13.7 |
1.0 - 1.4 |
7.2 - 10.1 |
| Ground cable bolt |
26.5 - 32.4 |
2.7 - 3.3 |
19.5 - 23.9 |
| IVT upper bolt |
42.2 - 53.9 |
4.3 - 5.5 |
31.1 - 39.8 |
| Starter bolt |
49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
| IVT mounting bracket bolt |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
| IVT support bracket bolt |
58.8 - 78.5 |
6.0 - 8.0 |
43.4 - 57.9 |
| Wiring bracket bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
| Cover bolt |
42.2 - 48.1 |
4.3 - 4.9 |
31.1 - 35.4 |
| Torque converter bolt |
45.1 - 52.0 |
4.6 - 5.3 |
33.3 - 38.3 |
| Roll rod bracket bolt |
49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
| 107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
| Roll rod support bracket bolt |
49.0 - 68.6 |
5.0 - 7.0 |
36.2 - 50.6 |
| IVT lower bolt |
42.2 - 48.1 |
4.3 - 4.9 |
31.1 - 35.4 |
| 42.2 - 53.9 |
4.3 - 5.5 |
31.1 - 39.8 |
Hydraulic System Intelligent Variable Transmission Fluid (IVTF)
| Item |
N·m |
kgf·m |
lb·ft |
| IVTF level plug |
34.3 - 44.1 |
3.5 - 4.5 |
25.3 - 32.5 |
| IVTF filler plug |
34.3 - 44.1 |
3.5 - 4.5 |
25.3 - 32.5 |
| IVTF drain plug |
34.3 - 39.2 |
3.5 - 4.0 |
25.3 - 28.9 |
Valve Body
| Item |
N·m |
kgf·m |
lb·ft |
| IVTF drain plug |
34.3 - 39.2 |
3.5 - 4.0 |
25.3 - 28.9 |
| Valve body cover bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
| IVTF fillter bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
| Valve body bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
Solenoid valve
| Item |
N·m |
kgf·m |
lb·ft |
| Support bracket bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
E-Module
| Item |
N·m |
kgf·m |
lb·ft |
| E-Module bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
IVT Control System Driven Pulley Pressure Sensor
| Item |
N·m |
kgf·m |
lb·ft |
| IVTF drain plug |
34.3 - 39.2 |
3.5 - 4.0 |
25.3 - 28.9 |
| Valve body cover bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
| IVTF fillter bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
| Driven pulley pressure sensor |
11.8 - 13.7 |
1.2 - 1.4 |
8.7 - 10.1 |
Driven Pulley Speed Sensor
| Item |
N·m |
kgf·m |
lb·ft |
| Driven pulley speed sensor bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
Position Switch
| Item |
N·m |
kgf·m |
lb·ft |
| Shift cable nut |
9.8 - 13.7 |
1.0 - 1.4 |
7.2 - 10.1 |
| Manual control lever nut |
17.7 - 24.5 |
1.8 - 2.5 |
13.0 - 18.1 |
| Position switch bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
Shift Lever
| Item |
N·m |
kgf·m |
lb·ft |
| Shift lever assembly bolt |
8.8 - 13.7 |
0.9 - 1.4 |
6.5 - 10.1 |
Shift Cable
| Item |
N·m |
kgf·m |
lb·ft |
| Shift cable nut |
9.8 - 13.7 |
1.0 - 1.4 |
7.2 - 10.1 |
| Shift cable retainer nut |
11.8 - 14.7 |
1.2 - 1.5 |
8.7 - 10.8 |
Lubricant
Lubricant
| Item |
Recommended |
Capacity |
| IVT(intelligent Variable Transmission) Fluid |
MICHANG SP-CVT1, Kia genuine ATF SP-CVT1 |
6.7 ℓ (1.77 U.S gal., 7.08 U.S.qt., 5.90 Imp.qt.) |
- Be sure to use the genuine IVT Fluid (SP-CVT1)
- When replacing with non-genuine IVT fluid, bad shift and vibration may occur, causing damamge to the IVT.
- Non-genuine IVT fluid includes after market IVT fluid indicated as interchangeable with genuine Kia fluid.
|
Was this page helpful?