Kia Stinger CK Quiz
Engine Control System/Fuel System

Seat Belt Switch

In this manual: Engine Control System/Fuel System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
2steps
~12min
1/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Description and Operation

Description

Using the seat belt/door switch, the ISG function can determine whether the seat belt is fastened and the driver's door is closed. If the driver's seat belt/door is not fastened/closed, the ISG system will not operate. If the seat belt/door is not fastened/open, the engine will not be stopped or restarted by the ISG function for safety reasons.

Repair Procedures

Removal

  1. Remove the front seat assembly.

    (Refer to Front Seat - "Front Seat Assembly")

  2. Remove the front seat belt buckle (A) after loosening the mounting bolt.

    Torque: 39.2 – 54 N·m

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.