Door Switch

Description and Operation

Description

Using the seat belt/door switch, the ISG function can determine whether the seat belt is fastened and the driver's door is closed. If the driver's seat belt/door is not fastened/closed, the ISG system will not operate. If the seat belt/door is not fastened/open, the engine will not be stopped or restarted by the ISG function for safety reasons.

Repair Procedures

Inspection

Front Door Lock Module Inspection

1. 1

   Remove the front door trim panel.

   (Refer to Body - "Front Door Trim Panel")

2. 2

   Remove the front door module.

   (Refer to Body - "Front Door Module")

3. 3

   Disconnect the actuator connector.

   

   [Central Locking]

   No.	Terminal Information
   	left	Right Side
   1	-	AJAR switch
   2	Motor 1	COM
   3	Motor 2	Lock/Unlock Switch
   4	-	-
   5	-	-
   6	Lock/Unlock Switch	Motor 2
   7	COM	Motor 1
   8	AJAR switch	-

   
   

   [Dead Lock]

   No.	Terminal Information
   	left	Right Side
   1	Motor 1	AJAR switch
   2	Motor 2	COM
   3	Motor 3	Lock/Unlock Switch
   4	Key unlock switch	Key interlock switch
   5	Key interlock switch	Key unlock switch
   6	Lock/Unlock Switch	Motor 3
   7	COM	Motor 2
   8	AJAR switch	Motor 1

4. 4

   Check the actuator operation by connecting power and ground as shown below. To avoid damaging the actuator, apply battery voltage only momentarily.

   [Central Lock (Without Key Switch)]

   

   [Dead Lock (Without Key Switch)]

   

   [Dead Lock (With Key Switch)]

   

   [Central Locking]

   

   [Dead Lock]

   

Installation

1. Install in the reverse order of removal.