Kia Stonic Quiz
Body (Interior and Exterior)

Rear Pillar Trim

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
7steps
~42min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Components and Components Location

COMPONENTS LOCATION

1. Rear Pillar Trim

repair procedures

REMOVAL AND INSTALLATION

  1. Loosen the mounting screws and remove the rear seat cushion (A).

  2. Remove the rear door weatherstrip and the luggage compartment door weatherstrip.

  3. Remove the luggage compartment cover (A).

  4. Remove the rear cross panel (A).

  5. Loosen the locking screw, then lower the rear seat belt anchor (A) and separate it.

    Tightening torque: 39.2~54 N·m

  6. Loosen the mounting screws, then remove the luggage compartment side panel (A).

  7. Remove the rear pillar trim (A).

8th.

Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.