Kia Stonic Quiz
Body (Interior and Exterior)

Front Seat Belt Buckle

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Components Location

COMPONENTS LOCATION

1. Front Seat Belt Buckle

repair procedures

REMOVAL AND INSTALLATION

  1. Remove the front seat.

    (See Front Seat - Front Seat).

  2. Disconnect the front seat belt lock connector (A).

  3. Loosen the mounting screw, then remove the front seat belt lock (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.