Kia Stonic Quiz
Body (Interior and Exterior)

Rear Bumper

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
10steps
~60min
3/5difficulty
Done 0 of 10

Components and Components Location

COMPONENTS LOCATION

1. Rear bumper cover

repair procedures

REMOVAL AND INSTALLATION

  1. Loosen the mounting screws, then remove the rear combination lamp (A).

  2. Remove the weather seal (A).

  3. Disconnect the rear combination lamp connector (A).

  4. Release the upper retainer of the rear bumper.

  5. Loosen the mounting screw, then remove the side part of the rear bumper.

  6. Remove the rear wheel arch clip (A).

  7. Loosen the mounting nuts and clips, then lower the side cover to remove the rear bumper.

8th.

Disconnect the rear bumper wire connector (A).

  1. Loosen the retaining screws.

    (LH)

    (RH)

  2. Remove the rear bumper (A).

  3. Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.