Kia Stonic Quiz
Body (Interior and Exterior)

Rear Bumper Beam

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
5steps
~30min
2/5difficulty
Done 0 of 5

Components and Components Location

COMPONENTS LOCATION

1. Rear Bumper Beam

repair procedures

REMOVAL AND INSTALLATION

  1. Remove the rear bumper cover.

    (Refer to Rear Bumper - "Rear Bumper Assembly")

  2. Disconnect the rear bumper beam wiring harness (A).

  3. Release the retaining clips, then remove the rear bumper beam.

  4. Loosen the screw, then remove the electronic key antenna (A).

  5. Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.