Rear Door Glass
Components and Components Location
COMPONENTS LOCATION

| 1. Rear Window Glass |
repair procedures
REMOVAL AND INSTALLATION
Remove the rear door panel.
(See Rear Door - Rear Door Panel)
Loosen the mounting screws, then remove the inside handle (A).

Disconnect the cable (A), then remove the rear door inside handle (B).

Loosen the screws, then remove the door inside handle mounting bracket (A).

Disconnect the rear door speaker connector (A), then remove the clips and the wiring harness.

Remove the rear door trim weatherstrip (A).

Remove the inside weatherstrip (A) from the rear door window channel.

| 8th. | Remove the outside weatherstrip (A) from the rear door window channel. ![]() |
Disconnect the door weatherstrip (A).

Loosen the bolt and nut securing the rear door window sash.

Remove the rear door glass run channel and moulding (A).

Loosen the mounting screws and remove the rear door glass (A).

Installation is the reverse of removal.
Test yourself
A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.
