Rear Door Window Regulator

Components and Components Location

COMPONENTS LOCATION

repair procedures

REMOVAL AND INSTALLATION

1. 1

   Remove the rear door panel.

   (See Rear Door - Rear Door Panel)

2. 2

   Loosen the mounting screws, then remove the inside handle (A).

   

3. 3

   Disconnect the cable (A), then remove the rear door inside handle (B).

   

4. 4

   Loosen the screws, then remove the door inside handle mounting bracket (A).

   

5. 5

   Disconnect the rear door speaker connector (A), then remove the clips and the wiring harness.

   

6. 6

   Remove the rear door trim weatherstrip (A).

   

7. 7

   Remove the inside weatherstrip (A) from the rear door window channel.

   

8th.	Remove the outside weatherstrip (A) from the rear door window channel.

1. 1

   Disconnect the door weatherstrip (A).

   

2. 2

   Loosen the bolt and nut securing the rear door window sash.

   

3. 3

   Remove the rear door glass run channel and moulding (A).

   

4. 4

   Loosen the mounting screws and remove the rear door glass (A).

   

5. 5

   Disconnect the rear door window regulator motor connector (A).

   

6. 6

   Loosen the rear window regulator mounting nuts.

   Tightening torque: 3.9~5.9 N·m

   

7. 7

   Remove the rear door window regulator (A).

   

8. 8

   Installation is the reverse of removal.