Turn Signal Switch

For the turn signals to operate, the ignition switch must be in ON. To activate the turn signals, raise or lower the lever (A). The green arrows on the instrument cluster indicate which turn signal is operating.

After the turn is completed, the turn signals cancel automatically.

If the indicator continues to flash after the turn, manually return the lever to the OFF position.

To signal a lane change, move the turn signal lever slightly and hold it in that position (B). The lever will automatically return to the OFF position when released.

If the indicator on the instrument cluster does not flash or flashes abnormally, a turn signal bulb on that side has burned out and must be replaced.

Short lane change signal function (if equipped) To activate the short lane change signal function, move the turn signal lever slightly and then release it. The lane change indicators will flash 3 times.

NOTE If an indicator flashes abnormally, a bulb has burned out or there is a faulty contact in the electrical circuit.