Digital clock

Whenever the battery terminals or their fuses are disconnected, the time must be reset.

When the ignition switch is in the ACC or ON position, the clock buttons work as follows:

Setting the clock (Type A, Type B)

With the audio system off

1. 1
   Press the [SETUP] / [CLOCK] button until the clock on the display flashes.
2. 2
   Set the clock by turning the knob (1), then press it.

With the audio system on

1. 1
   Press the [SETUP] / [CLOCK] button until the clock setting mode is displayed.
2. 2
   Set the clock by turning the knob (1), then press it.

CAUTION Never set the clock while driving.

You may lose steering control and cause an accident, endangering people's safety and lives.

Setting the clock (Type C)

HOURS: Turn the knob to the left (H) to advance the displayed time by one hour.

MINUTES: Turn the knob to the right (M) to advance the displayed time by one minute.