Rear washer switch

Repair Procedures

Inspection

Multifunction Switch Inspection

[BCM Type]

1. Check the circuit continuity between the terminals in each switch position, as shown below.

   

   [Left Hand Drive]

   Switch	Switch Position	Switch Terminal	Resistance (Ω, ±3.5%)
   Front Wiper Switch	FOG	1-9	330
   	OFF		∞
   	Intermittent (AUTO)		800
   	LOW		1800
   	HIGH		5700
   Rear Wiper Switch	OFF	9-16	∞
   	LOW		910
   	HIGH		2910

   
   

   [Right Hand Drive]

   Switch	Switch Position	Switch Terminal	Resistance (Ω, ±3.5%)
   Front Wiper Switch	FOG	3-16	330
   	OFF		∞
   	Intermittent (AUTO)		800
   	LOW		1800
   	HIGH		5700
   Rear Wiper Switch	OFF	9-16	∞
   	LOW		910
   	HIGH		2910

Inspection (with KDS/GDS)

1. 1

   Electrical body system faults can be quickly diagnosed using the vehicle diagnostic system (KDS/GDS).

   The diagnostic system (KDS/GDS) provides the following information.

   1. Self-Diagnosis: Checks malfunction and Diagnostic Trouble Code (DTC)

   2. Current Data: Check the system input/output status.

   3. Actuation Test: Check the system operating status

   4. Additional function: Control of other functions, including the setting parameter system and zero point adjustment.

2. 2

   Select "Vehicle Model" and "Body Control Module (BCM)" for inspection using the tester.

3. 3

   Select the "Current Data" menu to view the current input/output data status.

   

[Type without BCM]

1. Check the circuit continuity between the terminals in each switch position, as shown below.

   

   Rear Wiper and Washer Switch

   [Left-hand drive]

   

   [Right-hand drive]