Smart Key Diagnosis

Repair Procedures

Inspection

Self-Diagnosis with Scan Tool

The KDS/GDS can quickly diagnose SMART KEY system faults. The KDS/GDS can forcibly operate actuators, monitor input/output values, and perform self-diagnosis.

The following three functions are critical in the SMART KEY system.

1. 1

   SMART KEY Device Input Problem.

2. 2

   SMART KEY Unit Problem.

3. 3

   SMART KEY Device Output Problem.

Therefore, the following three diagnostic procedures are the main troubleshooting process.

1. 1

   SMART KEY Unit Input Problem: Switch Diagnosis

2. 2

   SMART KEY Unit Problem: Communication Diagnosis

3. 3

   SMART KEY Unit Output Problem: Antenna and Switch Diagnosis

Switch Diagnosis

1. 1

   Connect the KDS/GDS cable to the data link connector on the driver's side, lower panel of the emergency area, then turn on the KDS/GDS power.

2. 2

   Select the vehicle model, then select the SMART KEY system.

3. 3

   Select "SMART KEY Device".

4. 4

   After turning the IG on, select "Current Data".

   

5. 5

   You can check the position of each switch on the scan tool after connecting it, using the "Current Data" function.

   Display	Description
   FL Switch SW	ON: The driver's door handle button is on.
   FR Switch SW	ON: The auxiliary door handle button is on.
   Trunk Open SW	ON: The trunk lid button is on.
   Gear Position P	ON: The shift lever is in the P position.
   IGN 1	ON: The IGN switch is in the IG position.
   ACC	ON: The IGN switch is in the ACC position.
   Brake SW	ON: The brake switch is on.

KDS/GDS Communication Check (Self-Diagnosis)

1. 1

   Communication diagnosis checks whether each related component operates normally.

2. 2

   Connect the KDS/GDS cable to the Data Link Connector (DLC) on the driver's side, lower instrument panel.

3. 3

   After turning the ignition switch ON, select "DTC".

   

Antenna Activation Diagnosis

1. 1

   Connect the KDS/GDS cable to the Data Link Connector (DLC) on the driver's side, lower instrument panel.

2. 2

   After turning the ignition switch ON, select "Active Test".

   

3. 3

   Place the smart key near the corresponding antenna and operate it using KDS/GDS.

4. 4

   If the smart key LED blinks, the smart key is normal.

5. 5

   If the smart key LED does not blink, check the smart key battery voltage.

6. 6

   Antenna Activation

   • Interior Antenna 1

   • Interior Antenna 2

   • Trunk Antenna

   • Bumper Antenna

   • Driver Door Antenna

   • Auxiliary Door Antenna

Antenna Status Inspection

1. 1

   Connect the KDS/GDS cable to the Data Link Connector (DLC) on the driver's side, lower instrument panel.

2. 2

   Select "Antenna Status Check".

   

3. 3

   After turning the IG switch ON, select "Antenna Status Check".

   

4. 4

   Place the smart key near the corresponding antenna and operate it using KDS/GDS.

   

   

5. 5

   If the Smart Key operates normally, the corresponding antenna, Smart Key (transmission, reception) and external receiver are normal.

6. 6

   Antenna Status

   • Interior Antenna 1

   • Interior Antenna 2

   • Trunk Antenna

   • Bumper Antenna

   • Driver Door Antenna

   • Auxiliary Door Antenna

FOB Status Inspection

1. 1

   Connect the KDS/GDS cable to the Data Link Connector (DLC) on the driver's side, lower instrument panel.

2. 2

   After turning the ignition switch ON, select "KEY FOB STATUS INFO".

   

   

Smart Key Status Inspection

1. 1

   Connect the KDS/GDS cable to the Data Link Connector (DLC) on the driver's side, lower instrument panel.

2. 2

   After turning the ignition switch ON, select "SMK STATUS INFO".

   

   

Neutralization Status: Check

1. 1

   Connect the KDS/GDS cable to the Data Link Connector (DLC) on the driver's side, lower instrument panel.

2. 2

   After turning the ignition switch ON, select "Neutralization Mode".