Engine

Engine Mount. Engine Mount (front)

~2min read
0204060801005541N·mlb·ft
Tightening torque found on this page
Removal and Installation

REMOVAL

Remove the air cleaner case (upper), air cleaner case (lower), front air duct, and air duct hose and resonator assembly. Refer to Removal and Installation.

Remove the battery and battery tray assembly. Refer to Removal and Installation.

Remove the engine under cover. Refer to Removal and Installation.

Remove the fender protector side covers (RH/LH). Refer to Exploded View.

Partially remove the fender protectors (RH/LH). Refer to Exploded View.

Remove the radiator assembly. Refer to Removal and Installation.

Remove the engine cooling fan shroud and motor assembly. Refer to Removal and Installation.

Remove the exhaust manifold heat shield (LH). Refer to Exploded View.

Support the engine with a suitable tool.

Disconnect the engine mount insulator (front) vacuum hose.

Remove the engine mount insulator (front) nut (A).

Loosen the engine mount bracket (front) bolts in the reverse order shown.

: Engine front

Remove the engine mount bracket (front).

Remove the engine mount insulator (front) bolts in the reverse order as shown.

: Front

Remove the engine mount insulator (front).

INSTALLATION

Install the engine mount insulator (front).

Install the engine mount insulator (front) bolts and tighten to specification in the order shown.

: Front

Engine mount insulator (front) bolts : 55 N·m

Install the engine mount bracket (front) to the engine block.

Tighten the engine mount bracket (front) bolts to specification in the order shown.

: Engine front

Engine mount bracket (front) bolts : 40 N·m

Install the engine mount insulator (front) nut (A) and tighten to specification.

Engine mount insulator (front) nut : 103 N·m

Installation of the remaining components is in the reverse order of removal.