Engine and peripherals
Fast idle diaphragm
In this manual: Engine and peripherals
~1min read
FITTING AND ADJUSTING THE DIAPHRAGM
Fit the diaphragm (1) onto the rear bracket of the injection pump (2).
Clip the retaining clip (3) onto the diaphragm.

Fit the cable stop (4) onto the cable.
Position the cable clamp on the cable. Dimension X must be 2 mm ± 1. Tighten the clamp nut.

Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?