Engine and peripherals
Injection / air conditioning strategy
In this manual: Engine and peripherals
~1min read
A/C CONTROL UNIT / INJECTION CONTROL UNIT LINK
The electrical link:
- from the air conditioning control unit to the injection control unit is made by a wire. Only the A/C cycle information actually passes on this line. The injection control unit deduces the A/C selection information from it: pin 11,
- from the injection control unit to the air conditioning control unit is made by a wire. This line carries the compressor start authorisation and prohibition information: pin 19.
A/C COMPRESSOR START-UP STRATEGY
In certain operating phases, the injection control unit prohibits compressor operation.
Strategy at engine start
Compressor operation is prohibited for 3 seconds after engine start.
Performance restoration strategy
If full throttle is detected, A/C compressor operation is prohibited for 8 seconds.
Anti-stall protection strategy
If engine speed is below 650 rpm, the compressor is switched off. It will only be re-enabled when engine speed exceeds 775 rpm.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?