Steering Column

How to Use Troubleshooting

~3min read

PRECAUTION / NOTICE / HINT

HINT:

  • Follow the procedures below to troubleshoot the steering lock system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

(a) Ask the customer questions and confirm the problem.

Click here

NEXT
  1. CHECK BATTERY VOLTAGE

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

HINT:

A simple way to determine whether the battery is discharged is to activate the warning buzzer.

NEXT
  1. CHECK DTCs*

(a) Check the DTCs and record all codes output.

Click here

Body Electrical > Smart Key > Trouble Codes

HINT:

If DTCs indicating a malfunction in the CAN and/or LIN communication system are output, repair the CAN and/or LIN communication system before performing diagnosis.

for CAN communication system: Click here

for LIN communication system: Click here

Result:

Result

Proceed to

No DTCs are output. (The problem symptom cannot be confirmed or reproduced.)

A

No DTCs are output. (The problem symptom can be confirmed or reproduced.)

B

DTCs related to the steering lock system are output.

C

HINT:

  • When DTCs related to the steering lock system are output, refer to the DTC chart.

    Click here

  • The steering lock system does not store previous DTCs.
B

GO TO STEP 6

C

GO TO STEP 8

A
  1. SIMULATE SYMPTOMS

(a) Go to the How to Proceed with Troubleshooting section.

Click here

NEXT
  1. SYMPTOM TROUBLESHOOTING TABLE

(a) Go to the Problem Symptoms Table.

Click here

Result:

Result

Proceed to

The malfunction is not listed in the Symptom Troubleshooting Table.

A

The malfunction is listed in the Symptom Troubleshooting Table.

B

B

GO TO STEP 8

A
  1. GENERAL ANALYSIS AND TROUBLESHOOTING*

(a) Go to the Data List / Active Test.

Click here

(b) Go to the ECU Terminals.

Click here

NEXT

GO TO STEP 9

  1. CIRCUIT INSPECTION*

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. RECHECK DTCs*

(a) Clear the DTCs.

Click here

Body Electrical > Smart Key > Clear DTCs

(b) Check the DTCs and record all codes output.

Click here

Body Electrical > Smart Key > Trouble Codes

HINT:

Perform the operation to check the output DTCs.

Result:

Result

Proceed to

No DTCs are output.

A

DTCs related to the steering lock system are output.

B

A

END

B

GO TO DIAGNOSTIC TROUBLE CODE CHART