Steering Column

System Diagram

~2min read

SYSTEM DIAGRAM

Circuit Description

Component

General Description

Steering lock ECU (steering lock actuator or upper bracket assembly)

  • The steering is locked and unlocked through communication with the certification ECU (smart key ECU assembly) and the ID code box (immobiliser code ECU) via LIN communication.
  • When the following conditions are met, the steering can be unlocked.
    • The codes (L codes) of the ID code box (immobiliser code ECU) and the steering lock match.
    • The codes (S codes) of the ID code box (immobiliser code ECU) and the certification ECU (smart key ECU assembly) match.
    • The certification ECU (smart key ECU assembly) and the key ID codes match.

Certification ECU (Smart Key ECU Assy)

  • The ID code of the key carried by the user is sent to the door control receiver.
  • The certification ECU (smart key ECU assembly) compares the key ID code received from the door control receiver with its own ID code. If they match, the certification ECU (smart key ECU assembly) allows the steering lock ECU (steering lock actuator or upper bracket assembly) to turn the power ON, start the engine, and lock/unlock the steering.
  • Issues a command to supply power to the steering lock motor based on the power source mode, the shift position and the vehicle speed signal.

ID code box (immobiliser code ECU)

Receives the immobiliser activation and deactivation commands sent by the certification ECU (smart key ECU assembly) via LIN communication and sends them to the ECM.