Check / Clear DTCs
CHECK / CLEAR DTCs
NOTICE:
- The Steering Lock ECU (Steering Lock Actuator or Upper Support Assembly) does not store DTC history. If other DTCs are output, check and record them as soon as possible. Do not turn the engine switch OFF or clear the DTCs until the DTCs have been checked and recorded.
- DTCs may have been recorded due to problems not related to the steering lock system. Be sure to check and record all DTCs output for other systems.
- While using the Techstream with the vehicle engine switch in the OFF position, connect the Techstream to the vehicle and switch a welcome light switch ON and OFF at intervals of no more than 1.5 seconds until communication between the Techstream and the vehicle starts. Then select the vehicle type in manual mode and enter the following menus: Body Electrical / Smart Key. While using the Techstream, regularly switch a welcome light switch between ON and OFF at intervals of no more than 1.5 seconds to maintain communication between the Techstream and the vehicle.
CHECK DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))
HINT:
Steering lock system DTCs are output by the Steering Lock ECU (Steering Lock Actuator or Upper Support Assembly) via the Certification ECU (Smart Key ECU Assembly).
(a) Turn the engine switch to OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch to ON (IG).
(d) Turn on the Techstream.
(e) Select the following menu items: Body Electrical / Smart Key / Trouble Codes.
Body Electrical > Smart Key > Trouble Codes(f) Check DTCs.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))
(a) Turn the engine switch to OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch to ON (IG).
(d) Turn on the Techstream.
(e) Select the following menu items: Body Electrical / Smart Key / Trouble Codes.
Body Electrical > Smart Key > Clear DTCs(f) Clear DTCs.