Steering Column

DTC Chart

~2min read

DTC CHART

Steering lock system

DTC No.

Detection Item

DTC Detection Condition

Note

Link

B2781

Open or Short in Steering Lock ECU

One of the following conditions is met (1 trip detection logic (only output when a malfunction is detected and the engine switch is in the ON (IG) position)):

  • The steering lock sensor or steering unlock sensor malfunctions (when both detection switches turn ON, the system is determined to be malfunctioning).
  • The steering lock motor drive circuit is shorted.
  • The steering lock motor drive circuit is open.

DTC Output Confirmation Operation: No confirmation driving needed (continuous monitoring).

B2782

Power Source Control ECU Malfunction

One of the following conditions is met (1 trip detection logic (only output when a malfunction is detected and the engine switch is in the ON (IG) position)):

  • The steering lock motor drive control circuit is shorted.
  • The steering lock motor drive control circuit is open.

HINT:

If the power supply signal of the LIN communication line does not match the signal transmitted via the direct line, the system is determined to be malfunctioning.

DTC Output Confirmation Operation: Perform a steering lock/unlock operation. (The steering locks when a door is opened with the shift lever in P and the engine switch OFF. The steering unlocks when the engine switch is turned to ON (ACC) or ON (IG) while carrying the key.)

B2788

IG2 Signal Malfunction

Mismatch between the IG2 input of the Steering Lock ECU (Steering Lock Actuator or Upper Support Assembly) from the LIN communication system and the direct line. (1 trip detection logic (only output when a malfunction is detected and the engine switch is in the ON (IG) position))

DTC Output Confirmation Operation: No confirmation driving needed (continuous monitoring).