Brakes
BRAKES
INSPECT BRAKE LINES AND HOSES
HINT:
Work in a well-lit area. Turn the front wheels fully to the right or left before starting the inspection.
(a) Using a mirror, check the entire circumference and length of the brake lines and hoses for any of the following:
- Damage
- Wear
- Deformation
- Cracks
- Kinks
- Corrosion
- Leaks
- Twists
(b) Make sure all clamps are tight and the connections are not leaking.
(c) Make sure the hoses and lines are not near sharp edges, moving parts or the exhaust system.
(d) Make sure the lines are routed correctly and pass through the centers of the grommets.
CHECK BRAKE PEDAL
(a) Inspect the brake pedal.
Click here![]()
INSPECT PARKING BRAKE
(a) Inspect the parking brake.
INSPECT FRONT BRAKE
(a) Inspect the front brake pads and discs.
Click here![]()
CHECK REAR BRAKE
(a) Inspect the rear brake pads and discs.
- TMC production:
Click here
.gif)
- TMMT production:
Click here
.gif)
INSPECT OR REPLACE BRAKE FLUID
(a) Inspect or replace the brake fluid.
Click here![]()
Fluid:
SAE J1703 or FMVSS No. 116 DOT3
SAE J1704 or FMVSS No. 116 DOT4