Maintenance

Engine

~2min read

ENGINE

HINT:

Perform these procedures after the engine has cooled down.

INSPECT DRIVE BELT

(a) Inspect the drive belt.

Click here

INSPECT ENGINE OIL AND OIL FILTER

(a) Inspect the engine oil and oil filter.

Click here

INSPECT ENGINE COOLANT

(a) Inspect the engine coolant.

Click here

INSPECT SPARK PLUGS

(a) Inspect the ignition coils.

Click here

CHECK BATTERY

(a) Inspect the battery.

Click here

INSPECT AIR CLEANER FILTER ELEMENT

(a) Remove the air cleaner filter element.

(b) Make sure the air cleaner filter element is not too dirty.

If the air cleaner filter element is too dirty, replace the air cleaner filter element.

(c) When cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.

(d) Reinstall the air cleaner filter element.

INSPECT EXHAUST PIPES AND MOUNTINGS

(a) Check the pipes, brackets and connections for corrosion, leaks or other damage.

INSPECT FUEL TANK CAP GASKET

(a) Inspect the fuel tank cap gasket.

  • with fuel vapor absorber pump module:

    Click here

  • without fuel vapor absorber pump module:

    Click here

INSPECT FUEL LINES AND CONNECTIONS, FUEL VAPOR HOSES AND FUEL TANK BANDS

(a) Visually check that the fuel lines are not cracked, leaking, loosely connected or deformed.

(b) Make sure the fuel tank bands are not loose or deformed.

INSPECT CANISTER

(a) Inspect the canister.

  • with fuel vapor absorber pump module:

    Click here

  • without fuel vapor absorber pump module:

    Click here