Exterior Lighting

Installation

~1min read

INSTALLATION

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Connect the connector.

(b) Engage the guide, pin and clip to temporarily install the rear combination light assembly as shown in the illustration.

Install in this direction

(c) Install the rear combination light assembly using the 2 screws.

(d) Remove the protective tape.

2. INSTALL REAR COMBINATION LIGHT COVER

(a) Engage the claws to install the rear combination light cover as shown in the illustration.

Install in this direction