Exterior Lighting

Inspection

~2min read

INSPECTION

PROCEDURE

1. INSPECT LH REAR COMBINATION LIGHT ASSEMBLY

(a) Apply battery voltage to the LH rear combination light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 4 (TRN)

Battery negative (-) → Terminal 3 (E)

Turn signal light illuminates

If the result is not as specified, replace the LH rear combination light assembly.

*a

Component without wire harness connected

(LH rear combination light assembly)

(b) Apply battery voltage to the LH rear combination light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (B)

Battery negative (-) → Terminal 3 (E)

Stop lights illuminate

If the result is not as specified, replace the LH rear combination light assembly.

(c) Apply battery voltage to the LH rear combination light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (TL)

Battery negative (-) → Terminal 3 (E)

Tail light illuminates

If the result is not as specified, replace the LH rear combination light assembly.

2. INSPECT RH REAR COMBINATION LIGHT ASSEMBLY

(a) Apply battery voltage to the RH rear combination light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 4 (TRN)

Battery negative (-) → Terminal 3 (E)

Turn signal light illuminates

If the result is not as specified, replace the RH rear combination light assembly.

*a

Component without wire harness connected

(RH rear combination light assembly)

(b) Apply battery voltage to the RH rear combination light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (B)

Battery negative (-) → Terminal 3 (E)

Stop lights illuminate

If the result is not as specified, replace the RH rear combination light assembly.

(c) Apply battery voltage to the RH rear combination light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (TL)

Battery negative (-) → Terminal 3 (E)

Tail light illuminates

If the result is not as specified, replace the RH rear combination light assembly.