Exterior Lighting

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT LEFT FOG LIGHT ASSEMBLY (for LED type)

(a) Apply battery voltage to the left fog light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (B)

Battery negative (-) → Terminal 1 (E)

The fog light illuminates

If the result is not as specified, replace the left fog light assembly.

*a

Component without wire harness connected

(Left Fog Light Assembly)

2. INSPECT RIGHT FOG LIGHT ASSEMBLY (for LED type)

(a) Apply battery voltage to the right fog light assembly and check that the light illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 2 (B)

Battery negative (-) → Terminal 1 (E)

The fog light illuminates

If the result is not as specified, replace the right fog light assembly.

*a

Component without wire harness connected

(Right Fog Light Assembly)