Lost Communication with Meter (B1324)
DESCRIPTIONThis DTC is stored when a communication error occurs between the radio and display receiver assembly and combination meter assembly.
WIRING DIAGRAM
NOTICE: When replacing the combination meter assembly, make sure to replace it with a new one. PROCEDURE
(a) Disconnect the J140 radio and display receiver assembly connector. (b) Disconnect the J28 combination meter assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Remove the combination meter assembly. See page
(a) Remove the radio and display receiver assembly. for Column Shift Type: See page for Floor Shift Type: See page
(a) Replace the combination meter assembly. See page (b) Clear the DTCs. See page (c) Check for DTCs. See page OK: No DTCs are output.
|

