Microphone Circuit between Microphone and Radio Receiver
DESCRIPTIONThis circuit sends a microphone signal from the telephone microphone assembly to the radio and display receiver assembly. It also supplies power from the radio and display receiver assembly to the telephone microphone assembly. WIRING DIAGRAM
PROCEDURE
(a) Disconnect the J139 radio and display receiver assembly connector. (b) Disconnect the W11 telephone microphone assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Replace the telephone microphone assembly with a known good one (See page (b) Check if the same problem occurs again. OK: Malfunction disappears. Result
|
