Voice Recognition Microphone Disconnected (B1579)
DESCRIPTIONThe radio and display receiver assembly and telephone microphone assembly are connected to each other using the microphone connection detection signal lines. This DTC is stored when a microphone connection detection signal line is disconnected.
WIRING DIAGRAM
PROCEDURE
(a) Disconnect the J139 radio and display receiver assembly connector. (b) Disconnect the W11 telephone microphone assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Replace the telephone microphone assembly with a known good one (See page (b) Clear the DTCs (See page (c) Check for DTCs (See page OK: No DTCs are output. Result
|
