Radio Broadcast cannot be Received (Bad Reception)
PROCEDURE
(a) Check the radio automatic station search function by activating it. OK: Automatic station search function stops on a station.
(a) Check if any optional components that may decrease reception capacity, such as sunshade film or a telephone antenna, are installed. OK: Optional components are installed. NOTICE: Do not remove optional components without permission of the customer.
(a) Remove the pull top antenna pole sub-assembly from the antenna with holder assembly (b) Place the tip of a screwdriver on the antenna and check that noise is heard from the speakers. OK: Noise occurs. Result
(b) Turn the ignition switch to ACC with the radio and display receiver assembly connector connected. (c) Turn on the radio and turn into AM mode. (d) Place a screwdriver, thin wire or other metal object on the radio and display receiver assembly antenna jack and check that noise can be heard from the speakers. OK: Noise occurs. Result
(a) Check that the pull top antenna pole sub-assembly is securely installed (See page OK: The pull top antenna pole sub-assembly is installed properly.
(a) Replace the fender antenna assembly and check if radio broadcasts can be received normally (See page OK: Radio broadcasts can be received normally. Result
|
