Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter
DESCRIPTIONAudio function: This circuit is necessary for the automatic sound levelizer (ASL) built into the radio and display receiver assembly. ASL function: Speed signals are received from the combination meter assembly and used for the ASL. The ASL function automatically adjusts the sound volume in order to maintain clear audio sound even when vehicle noise increases (as vehicle noise increases, the volume is turned up, etc.). HINT:
WIRING DIAGRAM
PROCEDURE
(b) While driving the vehicle, compare the value of "SPEED" to the reading on the speedometer. (1) Check if these readings are almost equal. OK: Vehicle speed displayed on the "Vehicle Signal Check Mode" screen is almost the same as the reading on the speedometer.
(a) Disconnect the J139 radio and display receiver assembly connector. (b) Disconnect the J28 combination meter assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|

