Freeze Frame Data
1. FREEZE FRAME DATA
(a) Whenever a DTC is detected, the AFS ECU (headlight swivel ECU assembly) stores the current vehicle (sensor) state as Freeze Frame Data.
2. CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.
(e) According to the display on the Techstream, select the trouble code data display with Freeze Frame Data.
AFSTester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
+B |
IG power supply voltage value/0 to 19.75 V |
11 to 14 V |
- |
Steering Sens Signal |
Steering angle sensor signal value/-384° to 382.5° |
Value is output according to steering wheel position |
- |
FR Wheel Speed |
Front right wheel speed/0 to 328 km/h |
Condition can be displayed |
- |
3. CLEAR FREEZE FRAME DATA
NOTICE:
Clearing the DTC will also clear the Freeze Frame Data.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Clear the DTC and Freeze Frame Data (See page
).
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.